Jigsaw is a special type of power tool that uses a thin blade to cut through materials. Jigsaws are used to make a variety of cuts in wood, plastic and metal. The saw has a thin blade that reciprocates at high speed, … Read more

Hot air guns are the modern equivalent of a blowtorch, they are often also referred to as heat guns. They are used to heat up metal, plastic and other materials. Hot air guns have many uses, from removing paint and varnish to … Read more

A power-drill with a powerful hammer-action for drilling concrete and masonry, use the masonry bits only. If you have a dual use drill where you can turn off the hammer option high speed drill bits can be used also. Versions with SDS … Read more

Hacksaws are used for cutting metal. They can cut through thin materials, but are not suitable for cutting thick steel bars or similar materials. Hacksaws have a narrow blade that is hardened and is replaceable. The replaceable blades come in different sizes, … Read more

Angle grinders are a very-high speed rotary tool, with the cutting disk set at an angle of 90 degrees. It can be adapted for both left and right-handed persons. They can be used for cutting, grinding, sanding or polishing various materials including … Read more

Gloves are a type of personal protective equipment worn to protect the hands and fingers from injury. Gloves can be made of leather, metal, rubber and plastic, sometimes with additional thermal insulation. Gloves are for protecting your hands from cuts or abrasion … Read more

G-clamps are used to hold or compress workpieces while they are being glued or worked on. They are often used with a C-clamp to tighten a joint together. If a large amount of force is required, the workpiece can be compressed using … Read more

The float is a hand tool used for plastering. It is made of metal and plastic. It is like a flat spatula or trowel. The float can be used to spread plaster onto the wall and ceiling surfaces, or to smooth out … Read more

A flat-head screwdriver is a must-have tool for any home or garage. It is used to drive in, remove and turn out screws that are sunken below the surface. It can be used for driving in small screws, removing rusted or stripped … Read more

The term Electrician’s screwdriver can be defined as, or has a description of “A terminal screwdriver, but has extra insulating material along the shaft, sometimes has a neon bulb that warns when the part touched is “live”.”